If the track plays backwards, your L and R input connections are reversed - simply swap them and it will play normally.Ĭlick the + button at the bottom of the Sources window to add a new Audio Output Capture source, you can keep the defaults, click OK. Don't forget to switch the decks to Absolute or Relative mode. You can now load a track to the assigned decks and test the input signal. The circles will auto-calibrate, but if you need to make adjustments, you can do so following the instructions available by clicking the ? icon beside Control Signal Setting.Ĭlick the X to close the Preferences window. You should see green circles in the scopes for your input channels. Please note the output channels for the Booth Output this will send a copy of the master audio to Output 11 & 12, which are the Soundflower channels.Ĭlick the DVS icon again and test your inputs by playing the control signal source on your turntable or CDJ. Scroll down to configure the Output Channels. The DDJ-RZ has separate inputs for PHONO or CD/ LINE be sure to match the cabling per your selection in Step 3. I recommend using Input Deck 3 & 4 for the DVS input for a more natural layout of the DDJ and turntables / CDJs with regards to the mixer. Scroll down to configure the Input Channels. Click the DVS icon in the preferences window and check the box beside Enable DVS Function.Ĭlick the Audio icon and select the newly created RZ+Soundflower aggregate as your Audio device. Open rekordbox, and open the Preferences. In the right window, check the box beside DDJ-RZ, then check the box beside Soundflower (2ch). It CAN NOT contain the word "DDJ-RZ" or rekordbox will recognize it as that device and the additional outputs will NOT be available. With your DDJ connected and powered-on, open Applications > Utilities > Audio MIDI Setup - if the Audio Devices window is not visible, click Window > Show Audio Devices.Ĭlick the + icon at the bottom left and select Create Aggregate Device.Ĭlick on the name Aggregate Device and rename it RZ+Soundflower. Step 4 - Create an Aggregate Audio Device On the Controller Output tab, set the outputs for USB 5/6 and USB 7/8 to match the type of control tone you will be using ( PHONO or LINE). Open the DDJ-RZ Setting Utility. On the Mixer Mode tab, set the Mixer Mode to Internal Mixer Mode. You can also use other similar applications such as Sound Siphon or Loopback, but those are both paid apps and Soundflower works, and is free, so why not? There is just one extra tool necessary for us Mac users: If you are using a DDJ-RZ without DVS, the instructions are slightly different please see the this guide.Įnsure that you are running the latest version of rekordbox, that your drivers and firmware are up-to-date, and that your broadcast software is current as well. Please check the DDJ section of the Knowledge Base for additional tutorials. The instructions provided herein are based around a DDJ-RZ, and may be different for other DDJ units. This guide is a how-to for streaming using a 3rd party software such as OBS, and many of these instructions may also be applied to other software.
0 Comments
Leave a Reply. |